AP-2000
The only 2" probe that allows simultaneous turbidity, DO, EC, pH, ORP, depth and temperature measurements and one additional Ion Selective Electrode measurement.
Overview
Standard Parameters:
- pH
- ORP (Redox Potential)
- optical DO (Dissolved Oxygen)
- EC (specific and absolute electric conductivity)
- Salinity
- Resistivity
- TDS (Total Dissolved Solids)
- SSG (Seawater Specific Gravity)
- Temperature
The AP-2000 features 2 Auxiliary sockets to allow you to add further sensors to the probe. The probe can be used with a variety of cable lengths via the AquaConn Connectors. Cables available in 3, 10, 20 and 30m lengths as standard.
Customisation Options:
There are 3 simple choices to make to customise the probe.
The probe comes with 1 Ion Selective Electrode (ISE) socket and 1 optical electrode socket, plus an option to add a depth sensor!
Probes are supplied with blanking plugs in the ISE and optical electrode ports as standard. Simply unscrew these to add your extra electrodes.
Options:
- with depth (AP-2000-D) or without depth
- 1 selectable Ion Selective (ISE) electrode out of 5
- 1 selectable optical electrode out of 8
Using the AP-2000-D as a water level logger
The AP-2000-D features a depth sensor. This sensor is capable of measurement accuracy of 0.5%FS.
This is very comparable to a dedicated water level logger such as the LeveLine-ECO: 0.2%FS, and the LeveLine (titanium): 0.1%FS.
The depth is zeroed automatically whilst the conductivity is reading zero. As soon as the conductivity registers over 0 the probe depth begins to be calculated.
Once the probe is lowered to the desired depth it must be secured, then using the GPS Aquameter the depth can be zeroed once again.
Now the AP-2000-D will detect small changes in the water level and display them as a positive or negative change.
Electrodes and Specifications
Optional Ion Selective (ISE) electrodes | Optional optical electrodes | Electrode fitting options for AquaProbe probes |
---|---|---|
|
|
Mechanical Specification | |
---|---|
Protection Class | IP68 (permanent immersion) |
Immersion Depth | Min. 75 mm; Max. 100 m* |
Operating Temperature | -5°C ÷ +70°C |
Dimensions (L x Dia.) | 290 mm x 42 mm |
Weight | 700 g |
*100 m submersion for a period of 1 week; 30 m submersion for permanent deployment; depth measurement up to 60 m.